Basic operation – Audiovox SIR-PNP2 User Manual
Page 9
128-6901
9 of 28
display. Pre-set tuning continues until the user decides
to terminate this function by pressing and holding the
BAND Button for 2 seconds.
Keypad Buttons 0-9:
These buttons are used to directly enter a desired stream
number. They are also used when entering and recalling
preset stream numbers into memory.
Basic Operation
With the unit properly installed, activated and connected
to your home or vehicle audio system, proceed as fol-
lows:
1. Press the Power button; the Shuttle turns on and
the Sirius logo appears for 3 seconds followed by
the default display for the stream and tuning mode
in effect prior to turnoff.
2. Rotate the Encoder knob to select and play the
desired stream, or use the Category Up/Down
buttons to tune and select a desired stream based
on genre.
Tuning By Category
When in Category Tuning Mode, each momentary
press of the Category Up/Down Button(s) advances
through the available Genres:
1. Using the Encoder knob, select the
desired stream.
2. Press the Encoder knob to select that stream.
3. Once the stream has been selected, the unit will
revert to the default screen and your selection
will be played.
Content Listing Options (Look Ahead)
This feature allows you to view what is playing on other
streams without having to change the current stream you
are listening to. The content listing options are selected
by using the DISP button. When the default screen is
displayed on the LCD, pressing and holding the DISP
Button will display all the available stream numbers and
stream names. The second press of the DISP button
will display all currently available artists. The third press
of the DISP button will display song titles.
-9-
Category List Display