Audiovox SIR-PNP2 - Manual (Page 21)

128-6901
21 of 28
-21-
Alarm Time
When this menu option is highlighted and
selected the current alarm setting is displayed.
The factorydefault is 12:00PM. By pressing the
category buttons the hours can be increased or
decreasedin one hour increments. AM or PM
will switch automatically when the AM or PM
threshold has been exceeded. By rotating the
Encoder knob the minutes can be increased or
decreasedin one minute increments. Rotating
the Encoder knob in a clockwise (CW) direction
will increase the minutes and in a counterclock
wise (CCW) direction will decrease the min
utes. When the desired time is displayed, press
the Encoder knob.
NOTE: Loss of the satellite signal by the shuttle
will result in a series of alarm tones only.
Program Alert
When this menu option is highlighted and se-
lected, you will be able to program the unit to switch
to a selected stream at a specific time. On the dis-
play, Set Stream Alert will occupy the top text line.
The following adjustments are accessible:
Program Time/Day (Default-12:00pm, Monday)
Stream (Default-Currently Playing Stream)
Program Alert On/Off (Default-Off)
Time/Day:
Rotating the Encoder knob toggles between
Time and Day.
If Time is selected, pressing the category
buttons the hours can be increased or decreased
in one hour increments. AM or PM will switch
automatically when the AM or PM threshold
has been exceeded. By rotating the Encoder
knob the minutes can be increased or decreased
in one minute increments. Rotating the Encoder
knob in a clockwise (CW) direction will increase
the minutes and in a counterclockwise (CCW)
direction will decrease the minutes. When the
desired time is displayed, press the Encoder
knob.
If Day is selected, the screen displays a default
day of Monday, with selectable choices of Mon-
day, Tuesday, Wednesday, Thursday, Friday,
Saturday or Sunday. Use the Encoder knob to