Audiovox SIR-PNP2 - Manual (Page 8)

128-6901
8 of 28
-8-
Encoder Knob and Select Button:
The Encoder knob is the primary control for navigating
through the various lists and option menus available on
the unit. In the default mode, the Encoder knob provides
sequential tuning through the available program streams.
Clockwise (CW) rotation tunes up one stream-per-detent,
while Counterclockwise (CCW) rotation tunes down one
stream-per-detent. When in the list mode, turning the En-
coder knob CCW and CW scrolls down and up, respec-
tively, through the various menus and lists. The current
selection from the list will be highlighted on the display.
When the item is highlighted, press the Encoder knob
(Select Button) to enter the selection. Pressing and
holding the Encoder knob will tune to the previously
selected stream.
Category Buttons:
The Up or Down category buttons allows the user to ad-
vance through the stream groups based on content cat-
egory. By turning the rotary Encoder knob, the user can
then scroll up or down through the streams within that
category. Once a choice has been made, it can be en-
tered by pressing the Select Button.
Memory (MEMO) Button (S-SEEK Function):
This feature allows the user to capture and store the cur-
rent program data information (Stream Name & Number/
Artist & Song title). You can store up to 20 Artist/Song Title
combinations. The Shuttle also has the capability to search
the current incoming Sirius signal, and thereby alert you if
it matches the Artist/Song title stored in Shuttle memory.
Display (DISP) Button:
This button allows the user to choose one of several ways
of presenting the Stream Name, Artist and Song title infor-
mation on the LCD screen.
Menu (MENU) Button:
The MENU Button is used to access “Menu Options”
which displays the user setup menu, plus other feature/
function adjustments.
BAND Button (BAND)/Preset Tune (P. TUNE):
Each momentary press of the BAND Button allows the
user to switch between 3 bands of Stream presets (10
presets each A, B and C). Pressing and holding the
BAND Button for 2 seconds initiates preset tuning that
will display and tune all stored preset streams in
sequence. This is indicated by the reverse image of
the stream number and band preset number on the