Town Mongolian Barbecue Small - Manual (Page 16)

FOOD SERVICE EQUIPMENT CO., INC. • 72 Beadel St. • BKLYN • NY 11222
16
How to install a new thermocouple
1. Check for correct
type of gas.
Be sure the orifice is
tight before installing the
thermocouple.
2. Hand tighten nut so
thermocouple is snug to top
stop.
Do not tighten with a
wrench.
3. After the
termocouple is installed,
insert the pilot tubing as
far up into the pilot as
possible.
4. Tighten compression
fitting until top crimp snaps
off; then tighten a ⅛ turn.
5. If everything has been
installed correctly, your
pilot flame should look
like this.
orifice
thermocouple
“L” pilot
top stop
flush to top
threaded collar
pilot tubing
1/4 ” compression
fitting (loxit)
1/4 ” compression
fitting (loxit)