Anthem MRX 700 - Manual (Page 21)

13
3. SETUP
For optimum performance and enjoyment, your receiver should be properly set up. This may appear like a lot
of work but keep in mind that most settings do not need to be changed from defaults.
The most important things are entering information about your display and speakers if the defaults do not
apply, and the distance from each speaker to the listening area. The rest is Anthem Room Correction-related
and preference – the listening mode presets, for example, should be set up after you have played various
sources and have decided which surround modes you like best.
Remote Control Front Panel
HOW TO NAVIGATE IN THE SETUP MENU
• Press SETUP to enter or exit.
• Use the 56 and 34 buttons to scroll through menus and selections.
• Press SELECT to set a selection.
Upon entering the setup menu your display will usually show the menu below if connected with HDMI. Up to
eight menu items are displayed at once – for clarity this manual shows each menu with all items. On-screen
display is recommended although the front panel shows similar information, one item at a time.
If on-screen display is not shown on your TV, use the front panel display to set appropriate video output.
To go to a submenu, highlight a menu item and press 4. To return to the previous menu press3. Up to four
small arrows on each screen’s lower right indicate next possible steps.
Main Menu
Video Output Configuration 4
Speaker Configuration
Audio/Video Setup and Presets
Displays/Timeout
Trigger Configuration
General Configuration
System Information
Quick Setup
Press Setup to exit 34
3
4