Innovate Motorsports OT-1 - Manual (Page 2)

- 2 -
1.
Overview ............................................................................................................................... 3
1.1 OBD-II ............................................................................................................................... 3
1.2 Why is CAN so special?.................................................................................................... 4
1.3 MTS and the Log Chain Concept...................................................................................... 5
1.4 MTS Advantages............................................................................................................... 6
2. Installing the OT-1 ................................................................................................................ 7
2.1 Confirm the Contents of your Kit....................................................................................... 7
2.2 Locate the OBD-II Connector in your vehicle ................................................................... 8
2.3 Connect the OT-1 to your vehicle’s OBD-II port ............................................................... 9
2.4 Turn on the ignition switch and establish an OBD-II connection ...................................... 9
3. Configuring the OT-1 .......................................................................................................... 10
3.1 Install the Innovate Software Suite from the included CD .............................................. 10
3.2 Connect a USB cable between the computer and the OT-1 .......................................... 10
3.3 Run LM Programmer ...................................................................................................... 11
3.4 Select OBD-II Protocol and number of MTS Channels .................................................. 11
3.5 Assign MTS Channels to OBD-II Inputs ......................................................................... 12
3.6 Set the Priority of OBD-II Inputs (Optional)..................................................................... 15
3.7 Check and Clear any Vehicle Trouble Codes (Optional)................................................ 19
4. Getting Started With LogWorks .......................................................................................... 20
4.1 Make sure LM Programmer is not running! .................................................................... 20
4.2 Starting LogWorks.......................................................................................................... 20
4.3 Select the COM port to Log from .................................................................................... 20
4.4 Configure the OT-1 Channels for the proper OBD-II value ............................................ 22
4.5 Creating your First Log ................................................................................................... 23
5. Connecting with other MTS Devices .................................................................................. 24
6. Specifications...................................................................................................................... 25
Appendix A: Limited Warranty ...................................................................................................... 26
Appendix B: Supported PIDs........................................................................................................ 27
Revision History............................................................................................................................. 29