Airlink101 AR660W3G User Manual

Page 13

PIN Code

Please input Pin Code for your UMTS or HSDPA or EVDO
connection, this is optional, and only required if your service
provider asks you to do so.

APN

Please input the APN code assigned by your Internet service
provider here.

User Name

Please input user name assigned by your Internet service
provider here.

Password

Please input password assigned by your Internet service
provider here.

Verify Password

Please input password again for confirmation.

Service

Please select your service type between CDMA2000 or 3G/3.5G
Only. You may try both service types if you are not sure which
one your USB modem card uses.

AT Dial Script

Please input Dialed Number for your UMTS or HSDPA
connection, the default is *99#. This field should not be altered
except when required by your service provider.

Cable

Click on Cable Modem if you are connecting to Internet through a cable modem.
When the Dynamic IP settings come up, click “Clone MAC” button and click NEXT.

Parameter

Description

Host Name

Please input the host name of your computer, this is optional,
and only required if your service provider asks you to do so.

MAC Address

Please input MAC address of your computer here, if your service
provider only permits computer with certain MAC address to
access internet. If you are using the computer which used to
connect to Internet via cable modem, you can simply press
“Clone Mac address” button to fill the MAC address field with the
MAC address of your computer.