Agilent Technologies E1364A - Manual (Page 43)

Chapter 4
Service
Introduction
This chapter contains service information for the Agilent E1364A Switch
Module, including troubleshooting techniques and repair and maintenance
guidelines.
WARNING Do not perform any of the service procedures shown unless
you are a qualified, service-trained technician, and have read
the WARNINGS and CAUTIONS in Chapter 1.
Equipment
Required
Equipment required for switch troubleshooting and repair is listed in
Table 1-1, "Recommended Test Equipment." Any equipment that satisfies
the requirements given in the table may be substituted. To avoid damage to
the screw head slots, use a T8 Torx driver to remove the front panel handles.
Service Aids
See Chapter 3, "Replaceable Parts," or Appendix B, "Backdating
Information," for descriptions and locations of E1364A replaceable parts,
depending on the serial number of your switch module. Schematic
Diagrams are available at the back of this manual. Service notes, manual
updates, and service literature for the switch may be available through
Agilent. For information, contact your nearest Agilent Technologies Sales
and Support Office.
Chapter 4 Service 43