Agilent Technologies E1364A - Manual (Page 15)

Shipping Guidelines Follow the steps in Figure 1-3 to return the E1364A Switch Module
to an Agilent Technologies Sales and Support Office or Service Center.
* We recommend that you use the same shipping materials as those used in factory packaging (available from
Agilent). For other (commercially available) shipping materials, use a double-walled carton with minimum 2.4
MPa (350 psi) test.
Figure 1-3. Packaging/Shipping Guidelines
1. Prepare the Switch
•
Remove user wiring from terminal module.
•
Attach tag to switch that identifies:
– Owner
– Model Number/Serial Number
– Service Required
•
Place tagged device in approved anti-static
bag.
2. Package the Switch
•
Place packaged switch in shipping carton.*
•
Place 75 to 100 mm (3 to 4 inches) of
shock-absorbing material around the
module.
•
Seal the shipping container securely.
•
Mark the shipping container FRAGILE.
3. Ship the Switch to Hewlett-Packard
•
Place address label on shipping carton.
•
Send carton to Agilent Technologies.
Chapter 1 General Information 15