Agilent Technologies E1364A - Manual (Page 17)

Recommended Test Equipment
Table 1-1 lists the test equipment recommended for testing, adjusting, and
servicing the E1364A Switch Module. Essential requirements for each piece
of test equipment are described in the "Requirements" column.
Table 1-1. Recommended Test Equipment
Instrument Requirements Recommended Model Use*
Controller, GP-IB GP-IB compatibility as defined by
IEEE Standard 488-1978 and the
identical ANSI Standard MC1.1:
SH1, AH1, T2, TE0, L2, LE0, SR0,
RL0, PP0, DC0, DT0, and C1, 2, 3,
4, 5. HP 9000 Series 300
or
IBM compatible PC with HP
BASIC F,O,
P,T
Mainframe Compatible with switch
Use the E1403B A/B-to-C-size
Adapter to install a B-size module in
a C-size E14XX mainframe.
E1300A, E1301A,
E1302A (requires E1306A**)
E1400B/T (requires E1405A/B
or
E1406B**),
E1401B/T (requires E1405A/B
or E1406B**),
E1421B (requires E1405A/B
or E1406B**)
** or an embedded controller or
VXLink in place of a command
module.
F,O,
P,T
Digital Multimeter 2-wire ohms (up to 1 G Ω )
4-wire ohms
3458A
34401A O,P,T
* F = Functional Verification, O = Operation Verification Tests,
P = Performance Verification Tests, T = Troubleshooting
Chapter 1 General Information 17