Troubleshooting – ATEN PN9108U User Manual
Page 62
Troubleshooting
Problem 1:
On a safe shutdown and reboot operation, when rebooting, the computer
stops at the logon screen and waits for a Username and Password instead of
automatically logging on.
Solution:
The Autologon function hasn’t been configured for the computer. Set it up as
follows:
1. For Win NT, run regedit.exe; for Win 2000 or XP, run regedt32
2. Select the following:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows
NT\Current Version\Winlogon
3. Under the Edit menu, select Add Value.
4. Add the variables and values as shown in the table below:
Name
Value
DefaultDomainName
[domain name for this computer]
DefaultUserName
[user name for this computer]
DefaultPassword
[user password for this computer]
AutoAdminLogon
1
Note: Remove the brackets and replace the text inside the brackets with
suitable values for yourself on this computer.
5. Close the Registry Editor.
Note: Make sure you have a real password (not blank) configured for
logging on to your system.
2005-09-07
PN9108U User Manual
48