Clock and timer pg. 15, Setting the clock – Aiwa XR-M55 User Manual

Page 25

Text mode
Original mode

To change the program of each side
Press MODE to select side A or B, and press

to clear the program on the selected side. Then program tracks

again.

To clear the edit program
Press

twice so that "EDIT" disappears on the display.

• Recording is inhibited if the erasure prevention tab on either side of the tape is broken off.
• Up to 30 tracks can be programmed from anyh of the inserted disc.

CLOCK AND TIMER pg. 15

SETTING THE CLOCK

Set the clock during power on.

1 Press DISPLAY on the remote control and press

within 4 seconds.

The display flashes.

2 Press

to designate the time, then press

Each time

is pressed the time changes by 1 minute. To change the time by 30 minutes, press and hold

down

• MULTI JOG is also available instead of

and

To display the current time