AVerMedia Technologies EB1504 - Manual (Page 25)

21
Chapter 4 Using the USB Playback Console
4.1 Recommended system requirements
Pentium®4 2.4GHZ or above
Windows®2000/ XP
DDR 256 MB
Graphic function must support DirectDraw
Audio card or built-in
Speaker
1 available USB2.0 port
4.2 Installing the USB Playback Console
To install the USB Playback Console:
1. Place Installation CD into the CD-ROM drive. When the installation main
screen appears, click Install USB Playback Console and then follow the on
screen instructions
2. Select the language you prefer
3. Click OK to install the application
4. Click Exit to close the installation main screen.
5. You may now connect the DVR unit to PC by using USB cable.
6. Also, user can remove the hard disk and place in external USB enclosure, and
then connect to PC for playback, too.