AVerMedia Technologies EB1504 - Manual (Page 10)

6
The “compatible hard disks” indicated in the above recommendation list
only means that these commercially available hard disks were tested
with AVerMedia products and functioned well under normal operation
conditions. AVerMedia does not guarantee or provide warranties,
explicitly, implied or statutory with respect to the reliability of the hard
disk function or its compatibility. In no event AVerMedia shall be liable
for damages, with respect to any business interruption of clients, lost
profits, loss of programs or other data on your information handling
system or otherwise. This includes direct, indirect, incidental, special, or
consequential damages, resulting from the incompatibility caused by the
usage of these hard disks, even if AVerMedia has expressly advised
about the risk of such damages. The entire risk arising out of the use of
any information attached here with is borne by the recipient.
Follow the illustrated instructions below to install the hard disk:
1. Loosen all screws 2. Push the cover backward and lift
3. Loosen the hard disk rack 4 screws 4. Secure the brackets on the hard disk
(slave)
5. Connect the end of the IDE cable
and the power connector to the hard
disk (slave)
6. Secure the hard disk inside the unit
then replace unit cover