AVerMedia Technologies EB1504 - Manual (Page 23)

19
OSD MENU Description
and buttons to select the
security combination number. Press or
▲
button again to make the selection. Repeat
till you key in the last number. The factory default
password is 111111. Also, user could use number
key (
1 2 3 4 5 6 7 8 9 0 )
on the remote control to enter each digit of
password. To move the selection to the left and
right, use
▼ ▼
and
▼ ▼
buttons.
CHECK PASSWORD
ENTER PASSWORD
3. After entering the last number, the PASSWORD
CORRECT appears, you are now authorized to
format the hard disk.
YES
HARD DRIVE SETUP
OVERWRITE ENABLED
PASSWORD CORRECT
HD1 SIZE 37 GB 78MB
HD1 USED 0 GB 232MB 0%
HD1 FORMAT
HD2 SIZE 0 GB 0MB
HD2 USED 0 GB 232MB 0%
HD2 FORMAT
4. Use the
▲
and
▼
or and
buttons and select the hard disk you want
to format.
5. It is done when the “HDD FORMAT COMPLETED”
appears.
Formatting the hard disk will permanently
delete all the records. The records can no
longer be retrieved.