Spectra Precision ProFlex 800 Backpack - Manual (Page 34)

English
30
Logging Raw Data
Starting/Stopping
Raw Data Logging
You simply need to use the Log button to start and stop raw
data logging. Later, you will however need to do the following
manually:
1. Downloading phase (if appropriate, rename the raw data
files collected on each site).
2. Post-processing phase: Manually correct all computed
elevations for the antenna height.
By default, raw data is logged to the receiver’s internal
memory. The Raw Data Logging icon on the General Status
screen will start flashing when a raw data file is open for
logging.
Downloading Raw
Data
Use a USB mass storage device as a transit storage medium
to download raw data files from the receiver’s internal
memory to your office computer.
Important! During a download operation, files are not deleted
from the receiver but simply copied to the USB mass storage
device.
After downloading the files to this device, connect the USB
device to your computer and use your usual browser to copy
the files to the project folder.
Using a USB Mass Storage Device
• Connect the USB mass storage device to the receiver via
the short USB Host-to-Device cable provided (P/N
702104).
If raw data files are present in the receiver’s internal
memory, the following icons will automatically appear on
the display screen:
• To confirm the file transfer, press the Log button. The
General status screen will re-appear after the file transfer
is complete.
• To cancel the file transfer, press the Scroll button.