DataComm 45-0004 Reverse Nose Décor Insert User Manual
DataComm For Home
DataComm Electronics, Inc.
6349 Peachtree Street
Norcross, GA 30071-1725
888.223.7977
770.662.8205
www.DataCommElectronics.com
Tools Needed
Philips Head Screw Driver
Installation
1. Before installing the Reverse Nose Décor Insert, you must first install a low
voltage mounting bracket (sold separately) into the wall. Refer to the instructions on
the low voltage mounting bracket for assistance.
2. Run low voltage A/V cables through the opening in the low voltage mounting bracket,
and then through the opening of the Décor Insert.
3. Place the Décor Insert against the low voltage mounting bracket. Using the two (2)
included screws, screw the Décor Insert into place on the low-voltage mounting
bracket.
4. To give your installation a finished look, install a décor wallplate (sold separately) over
the Décor Insert.
Instruction / Installation Sheet
Reverse Nose Décor Insert
Part # 45-0004
Use the Reverse Nose Décor Insert to install low
voltage cables behind your HDTV, amplifier or
other audio video devices. The Reverse Nose
Décor Insert is designed to be installed onto a low
voltage mounting bracket (sold separately) that is
installed into the wall.
• This product is designed for use with low
voltage cables ONLY.
• DO NOT run or pull a TV cord or other
electrical cords inside the wall.
• It is a violation of the National Electric Code
(NEC) to run power cords or extension
cords behind the wall.
This product is patent protected by U.S. Patent numbers D553475, D554475
and 7,390,964 B2. RoHS Compliant.
Caution:
• Never install low voltage wiring during lighting storms.
• Never touch un-insulated wires or terminals unless the wire has been disconnected at
its network interface.
• Use caution when installing or modifying data or telecommunication lines.
• DO NOT alter, change, or disconnect existing telecommunication wires if you are
unsure of their purpose or function.
• It is NOT recommended to install this product in close proximity to an electrical service
panel to prevent interference from electrical current.
Important Instructions:
• Read and understand all instructions.
• Do not use this product near water, for example near bath tub, wash bowl, kitchen,
sink, or laundry tub, in a wet basement, or near a swimming pool.
• SAVE THESE INSTRUCTIONS.