Boltek EFM-100 v.2 - Manual (Page 18)

C H A P T E R 2 - I N S T A L L A T I O N
12
ST Fiber Optic Connectors
The EFM-100 transmits its data over a fiber optic cable. The fiber optic cable uses St style
connectors on each end.
Figure 12: Female Fiber Optic Connector
If the field mill installer is not familiar with ST fiber optic connectors he should familiarize
himself with the connectors on the ground, before mounting the field mill on the roof.
Align the key in the male connector with the keyway in the female connector before
inserting the male connector into the female connector. Insert the male connector into the
female connector and rotate the locking collar until you feel the tabs stop in the detents.
Figure 13: Male Fiber Optic Connector