Alpine IVA-W203 - Manual (Page 78)

76
-EN
01GB07IVA-W203.fm
ALPINE IVA-W203 68-10872Z42-A (EN)
System Example
Connect the Ai-NET compatible audio processor (Fiber optic digital compatible), DVD player and changer.
• When the fiber optic compatible product is connected, it is necessary to set the mode of this unit. Refer to “Setting the Digital Output” (page 37)
and set to ON.
Please observe the following when using Fiber Optic Cable.
• Do not coil the Fiber Optic Cable smaller than a 30 mm radius.
• Do not place anything on top of the Fiber Optic Cable.
• Be careful not to bend the Fiber Optic Cable at a sharp angle.
NORM
Ai-NET
EQ/DIV
Fiber optic cable
Fiber optic digital Input
terminal (for head unit)
Audio Processor (Ai-NET)
(Fiber Optic Digital
compatible) (Sold
Separately)
Fiber optic digital
Input terminal (for
DVD Player)
Ai-NET cable
Fiber optic digital
Input terminal (for
Changer)
* Fiber
optic cable
Ai-NET
cable
CD Changer
(Ai-NET)
(Sold Separately)
* Only connect fiber optic digital compatible CD Changer
DVD Video Player
(Ai-NET)
(DVA-5210 etc.)
(Sold Separately)
Fiber optic cable
REMOTE IN REMOTE OUT
(White/Brown) (White/Brown)
(Yellow)
Ai-NET cable
01GB00IVA-W203.book Page 76 Thursday, June 5, 2008 3:55 PM