Setup, Dvd setup, Dvd setup operation – Alpine IVA-W203 User Manual
Page 30
28
-EN
01GB05IVA-W203.fm
ALPINE IVA-W203 68-10872Z42-A (EN)
DVD Setup Operation
The DVD Setup operation can be carried out after removing the
disc from the unit.
1
Touch [SETUP] on the main source screen.
The SETUP selection screen is displayed.
2
Touch [SOURCE].
The SOURCE SETUP screen appears.
3
Touch [
] of DVD SETUP.
The DVD setup screen appears.
4
Touch [
] or [
], etc., of the desired item to change
its setting.
Setting items:
MENU LANGUAGE / AUDIO LANGUAGE / SUBT. LANGUAGE /
COUNTRY CODE / PARENTAL / DIGITAL OUT MODE /
DOWNMIX MODE / TV SCREEN / BONUS CODE /
DVD-A SETUP / FILE PLAY MODE / PBC
Display example for DVD setup screen
Touch [
] or [
] to set a desired language.
Touch [CODE] to display the numeric keypad input
screen.
Touch [
] or [
] to scroll a setting item list by one Line.
Touch and slide up or down to scroll the list backwards
or forwards.
The numeric keypad input screen closes when the area
is touched while displayed.
Numeric keypad input screen
The numeric keypad is used if you want to play back in
a language other than that displayed, or to input your
parental lock password, etc.
Setup
DVD Setup
To display the DVD mode screen:
To watch a video source, your vehicle must be parked with the
ignition key in the ACC or ON position. To do this, follow the
procedure below.
1 Bring your vehicle to a complete stop at a safe
location. Engage the parking brake.
2 Keep pushing the foot brake and release the parking
brake once then engage it again.
3 When the parking brake is engaged for the second
time, release the foot brake.
• For automatic transmission vehicles, place the transmission lever
in the Park position.
Now, the locking system for the DVD mode operation has been
released. Engaging the parking brake can reactivate the DVD
mode, as long as the car’s ignition has not been turned off. It is
not necessary to repeat the above procedure (1 through 3) of “To
display the DVD mode screen.”
Each time the ignition is turned OFF, perform the procedure of “To
display the DVD mode screen.”
The following steps 1 to 5 are common operations to each
“Setting item” of DVD Setup. Refer to each section for details.
01GB00IVA-W203.book Page 28 Thursday, June 5, 2008 3:55 PM