beautypg.com

Presetting desired channels – Audiovox SIRIUS SRSIR-001FM User Manual

Page 7

background image

128-6374

7 of 12

7

PRESETTING DESIRED CHANNELS

This section describes how to preset up to 20 channels on your SCU

(two groups of 10 channels, upper and lower) for rapid and easy access.

Proceed as follows:

1. Select the desired channel you wish to save in memory by using the

directional buttons (

WX

WX

WX

WX

WX), direct access method, or category select tuning

method.

2. With the desired channel displayed, press and hold any one of the numbered

keypad buttons for until the confirmation tone (or second tone) is heard

(Refer to Confirmation Tone(s)Function). Continue with this process until

the first group of 10 preset channels is loaded (lower group).

NOTE: There is a preset channel group indicator icon located in the top right
corner of the SCU display. This is used

to determine which group you are in.

· (

SR1

) = Lower Preset Channel Group (first 10 channels)

· (

SR2

) = Upper Preset Channel Group (next 10 channels)

3. To program the second group of 10 preset channels (upper group) press and

Hold the Shift (SFT) button for 2 seconds until a tone is heard. By doing this

you have entered the second bank (upper group) and the SCU is ready to

accept an additional group of 10 channels into memory.

4. Select the desired channel you wish to save in memory by using the

directional buttons (

WX

WX

WX

WX

WX), direct access method, or category select tuning

method.

5. With the desired channel displayed, press and hold any one of the numbered

keypad buttons for until the confirmation tone (or second tone) is heard.

Continue with this process until the second group of 10 preset channels is

loaded (upper group).

Preset channels being previewed are displayed in the lower right corner. A black
number on white background indicates that it is part of the lower group of chan-
nels and a White number on a Black background indicates that it is part of the
upper group.

PRESS THE SHIFT
BUTTON

CHANNEL NUMBER
FLASHES

PRESS KEYPAD BUTTONS
TO SELECT DESIRED
CHANNEL

SFT

0

4

7

1

5

8

2

6

9

3

AUDIO OX

20 on 20

The Techs

Oh Baby Oh Baby

---------------------------------

CH 020

Hits

SELECTING CHANNEL CATEGORIES (only in Category Mode)

This section describes the procedure used to select a specific group or

category of entertainment, proceed as follows:

1.

With the system powered up, momentarily press the Shift (SFT) but-

ton causing the first channel number in the current category to flash for

5 seconds.

2.

While the number is flashing, momentarily press and release either direc-

tional button (

WX

WX

WX

WX

WX) a desired category is reached. The category will

advance one at a time and will also flash for 5 seconds. If no further

advance is made, the flashing will stop and the category will then remain

steady.

3.

To advance rapidly in the chosen direction (Up or Down) and while the

channel number is flashing, momentarily press and release either direc-

tional button (

WX

WX

WX

WX

WX) in a rapid manner. Release the directional button

when a desired channel is reached.

NOTE: A low tone busy signal may be heard if the directional buttons are

pressed too quickly indicating that the system has not yet completed the

previous command to advance. Refer to Confirmation Tone(s) Function.

Each category or group is assigned a sequential block of channels. To

navigate within a category, enter Shift (SFT) 0981 Shift (SFT). This

modewill allow the user to switch between channels within a chosen

category, the channel tuning will automatically wrap around from the lastto the

first channel in that category or vice-versa. When a new category is chosen,

the radio will automatically select the first channel in that category.

NOTE: If a directional button is Pressed and Held channels will begin to scroll

in numerical sequence through all categories until the button is released.

This navigation mode will continue to function in the same manner in the new

category. The user must exit this mode before attempting to perform any other

function. To exit this mode, enter Shift (SFT) 0980 Shift (SFT).

C A T E G O R Y /
GROUP NUMBER
FLASHES

SFT

0

4

7

1

5

8

2

6

9

3

AUDIO OX

20 on 20

The Techs

Oh Baby Oh Baby

---------------------------------

CH 020

Hits

PRESS
SHIFT

PRESS UP BUTTON TO
ADVANCE TO NEXT
HIGHER CATEGORY

PRESS DOWN BUTTON TO
ADVANCE TO NEXT
LOWER CATEGORY

C A T E G O R Y /
GROUP

Figure 8. Accessing Channels

Figure 9. Sellecting Channel Categories

This manual is related to the following products: