Figure 4-17: arm mounting retention screw holes – IEI Integration AFL-15A-N270 v2.20 User Manual

Page 57

AFOLUX AFL-15A-N270 Panel PC

Page 57

Step 2:

Once the mounting arm has been firmly attached to the surface, lift the flat panel

PC onto the interface pad of the mounting arm.

Step 3:

Align the retention screw holes on the mounting arm interface with those in the

flat panel PC. The AFL-15A-N270 arm mount retention screw holes are shown in

Figure 4-17: Arm Mounting Retention Screw Holes

Step 4:

Secure the flat panel PC to the interface pad by inserting four retention screws

through the bottom of the mounting arm interface pad and into the flat panel PC.

Step 0: