beautypg.com

5 removing the rear panel, 6 cf card installation, Emoving the – IEI Integration AFL-15A-N270 v2.20 User Manual

Page 38: Anel, Nstallation, Figure 4-1: back cover retention screws

background image

AFOLUX AFL-15A-N270 Panel PC

Page 38

4.5 Removing the Rear Panel

WARNING:

Over-tightening back cover screws will crack the plastic frame.

Maximum torque for cover screws is 5 kg-cm (0.36 lb-ft/0.49 Nm).

To access the AFL-15A-N270 internally the rear panel must be removed. To remove the

rear panel, please follow the steps below.

Step 1:

Remove the 16 retention screws (Figure 4-1).

Figure 4-1: Back Cover Retention Screws

Step 2:

Lift the cover off the AFL-15A-N270 panel PC.

Step 0:

4.6 CF Card Installation

The AFL-15A-N270 series has one CF Type II slot inside the rear panel. To install the CF

card, follow the instructions below.

Step 1:

Remove the back cover. See Section 4.5.

Step 2:

Locate the CF slot in the left panel.