WolfVision VZ-15b User Manual - Manual (Page 20)

SPECIFICATIONS
Pick-up element / video
VZ-15b VZ-35b
Built-in camera system 3 CCD unit - 1/2" interline transfer 1 CCD unit - 1/2" interline transfer
Effective pixels: 3 lines 752x582 = VZ-35b PAL
3 lines 768x494 = VZ-35b NTSC 752 x 582 = VZ-15b PAL
768 x 494 = VZ-15b NTSC
Horizontal resolution: > 750 TV lines > 470 TV lines
White balance: automatic / 3200K / 5600K / manual automatic / manual (units with serial number higher than 154423)
Iris: automatic / manual
Optics: 8.5 x telezoom 20 - 170 mm, f = 2.0
Depth of focus: tele position: 70mm (2.75"), wide position: 250mm (9.7")
Gain control: automatic / manual 0 to 18 dB switchable automatic
Electronic shutter: off / step / manual - allows flicker free
scanning of computer monitors -
Operation
Infrared remote control: functions: zoom, focus, iris, image on/off, preset 1 and 2
Control panel: functions: zoom, focus, iris, image on/off, light, power, preset 1 and 2
zoom on A5 format, focus on working surface level, light on, iris automatical Power-on preset:
2 programmable presets: programmable settings: zoom, focus, iris, light, image (lifetime memory)
Camera control panel: functions: menu, display, functions up/down,
data up/down, white/black balance, bars,
Two settings can be stored, Reset function function: white balance
Lighting element
telezoom, electronically synchronized with camera lens
Light source:
Light/image synchronization:
24 V / 150 W halogen-lamp, 3200 kelvin (with constant spectrum !)
Spare lamp: built-in lamp changer with LED indicator
Scanning area
objects on working surface: width: 36-270mm (1.4"-10.5"), length: 42-360mm (1.6"-14"), height: up to 250mm (9.7")
objects in a room: to eternity
Connections
RGBS-output: true RGBS signal, 4 x BNC connectors (RGB: 0.7 Vpp
75
W, Sync: 2 Vpp) switchable with IMAGE-keys
converted Y/C-signal, 4 x BNC connectors (RGB: 0.7
Vpp 75
W, Sync: 2 Vpp) switchable with IMAGE-keys
Y/C (S-VHS) output: 7-pin connector, Y-signal: 1 Vpp 75 C-signal: 0.3 Vpp 75 W, W, switchable with IMAGE-keys
Preview video output: BNC connector, composite video signal, VBS 1.0 Vpp 75 W
Composite video output: BNC connector, composite video signal, VBS 1.0 Vpp 75 W, switchable with IMAGE-keys
Sync input: BNC connector, composite video signal or Black Burst (BB), VBS 1.0 Vpp 75 W , H-phase and SC-phase adjustable
Component output: YUV, BNC connectors, switchable with IMAGE-keys
Parallel port: input for external wired remote control and output for LCD control monitor (12 V DC and composite video)
Serial port: configuration: RS 232, extended serial protocol including status report
General specifications
Power source: 90-120 V or 210-264 V AC, 50/60 Hz
Power consumption: 230 W
Working surface: reversible: one side crystalline white / one side dark grey, size: 431 x 341mm (17" x 13.5")
Weight:
Made in:
16 kg (34 lbs) 16 kg (34 lbs)
European Community (Austria)
230 W
These specifications can only be
found on WolfVision Visualizers ! Specifications and availability subject to change.
-
12 V DC output: for lightbox (can be switched on and off with the "light"-keys), 1.5A
Y/C CONNECTORS / CABLE
(7-pin to 4-pin):
1. Y-signal
2. Y-ground
5. C-signal
6. C-ground
3, 4 and 7 not connected 3. Y-signal
1. Y-ground
4. C-signal
2. C-ground
1 6
2 7 5
3 4
(connectors viewed from front side)
3 4
1 2
SCOPE OF SUPPLY
VZ-15b: Infrared remote control, instructions manual, short instructions, Y/C cable, BNC cable, RCA-BNC adapter,
instructions manual, short instructions,
VZ-45b: Infrared remote control, instructions manual, short instructions, 5 x BNC cable,
VZ-35b: Infrared remote control, Y/C cable, 5 x BNC cable, RCA-BNC adapter,
20