WansView NVR901 - Manual (Page 7)

HTTP port. Before clicking ‘update’, please ensure the authentication
information entered is correct. The factory default is "admin" and
"123456"
¾ Select the NVR and click "Browse", and then it opens the web browser
automatically. The login interface as Figure 7.
Figure 7
5.2 System setting
1) System information
2) Time setting: Use NVR at the first time, must adjust the clock of NVR in
order to record the video information according to correct time；
3) User setting: user can change the password on user setting page；
4) Disk management : Running at the first time , if NVR detect the Hard disk
is not formatted, NVR will automatically format for the hard disk , users
also can manually format for it , also check the space information of Hard
disk
5) System initialization: you can restart the device and restore the factory
default value, also upgrade firmware.
5.3 Video Record Setting
5.3.1 Channel Management
NVR supports connect up to 8pcs IP Camera. Each camera takes up one
channel. Click "Channel Management", add IP Camera to recording channel
on this interface example of Figure 8.
7