Harrington Hoists and Cranes HPC 500 End Truck User Manual
Page 22
22
5.5
Occasionally Used End Trucks and Cranes
5.5.1
End Trucks and cranes that are used infrequently shall be inspected as follows prior to placing in
service:
Idle More Than 1 Month, Less Than 1 Year: Inspect per FREQUENT Inspection criteria of Section
5.3 above.
Idle More Than 1 Year: Inspect per PERIODIC Inspection criteria of Section 5.4 above.
5.6
Inspection Records
Dated inspection reports and records should be maintained for PERIODIC inspections. These records should
be stored where they are available to personnel involved with the inspection, maintenance, or operation of the
equipment.
5.7
Inspection Methods and Criteria
5.7.1
This section covers the inspection of specific items. In accordance with the standards listed in
paragraph 5.1 above, these inspections are not intended to involve disassembly. Rather, disassembly
for further inspection would be required if FREQUENT or PERIODIC inspection results so indicate.
Only a Qualified Person trained in the disassembly and re-assembly of the equipment should perform
such disassembly and further inspection.
5.7.2
Table 5-2 below gives Methods, Criteria, and Corrective Action for the inspection of components of
HPC500 End Trucks and Cranes.