General Pump SK Repair Manual - Manual (Page 19)

GENERAL PUMP
A member of the Interpump Group
SK SERIES
From the side of the casing where the PTO shaft was inserted, proceed to insert the bearing lubrication
bushing (1, fig. 58) and an external bearing ring (1, fig. 59) using a pad and a mallet or striking hammer.
Page 19
At both sides, insert the internal bearing spacers (1, fig. 60) and the external bearing spacers (1, fig. 61).
Insert the internal ring (1, fig. 62) and external ring (1, fig. 63) of a bearing from one side of the pump only.