General Pump SK Repair Manual - Manual (Page 12)

GENERAL PUMP
A member of the Interpump Group
SK SERIES
Slip the internal bearing rings off the PTO shaft (1, fig. 34) and also slip off the two internal bearing
spacers (1, fig. 34).
The internal and external bearing rings must be reassembled in exactly the same order and
pairings in which they were dismantled.
Using a sufficiently long bar (1, fig. 35) and a striking hammer, take the bearing rings out of the pump casing
(1, fig. 36), along with the external bearing spacer (1, fig. 37) and the bearing lubrication bushing (1 fig. 38).
Page 12