IQinVision R5 Series - Manual (Page 8)

8
4. To view a camera, double-click a camera entry
or highlight a camera in the list and click the
“Web Page” button (Figure 12.3). The “Live” page
will be displayed through the default browser
(IE recommended). It is also possible to open
Internet Explorer and enter the IP address of the
IQeye camera in the address field of the browser.
If prompted, install the Active X control (Figure
12.4).
5. To perform further configuration of the camera click
on the “Setup” tab.
NOTE: The default username is “root” and the default password is
“system”.
6. To prepare the camera to serve the H.264 stream,
select H.264 from the video format drop-down
(Figure 12.5). To view the H.264 stream full screen
(without “Live” page controls), double click on the
video area. Double-click on the video image again
to return back to the “Live” page.
13 Factory Reset
If you need to reset the camera for any reason:
1. Press and hold the “Reset” button for 10 seconds as
illustrated in Figure 13.1.
For product warranty, additional documentation and technical information,
please visit www.iqeye.com/support
For information on Supported SD Cards please visit
https://iqinvision.zendesk.com/entries/46439946-Supported-SD-cards
Figure 12.3
Figure 12.4
Figure 12.5
33122 Valle Road San Juan Capistrano, CA 92675-4853 USA | phone +1 949 369 8100 | fax +1 949 369 8105 | www.iqeye.com 901-0361 Rev A
Figure 13.1