Fe network ports – Alcatel Carrier Internetworking Solutions Alcatel OmniAccess 4324 User Manual
Page 33
Ports
19
Appendix B
FE Network Ports
Ports are grouped in banks of 8 (as shown in
on
are 3 banks, for a total of 24 ports. These ports provide 10/100 Mbps Fast
Ethernet connectivity, and in some cases, power and serial connectivity as
well. See material starting on
for port and cable specifications.
LNK/ACT LED
Each FE port has its own LNK/ACT LED, located at the left side of the port.
During operation, these LEDs provide the following status information:
POE LED
Each FE port has its own POE LED, located at the right side of the port. This
LED provides the following POE status information:
T
ABLE
B-1 FE LNK/ACT LED
Status
Description
Off
No Ethernet link on the port.
Green
An Ethernet link has been established on the port, but no
data is currently being transmitted or received.
Flashing
Green
The port is transmitting or receiving data. The flashing
rate is proportional to your network activity.
T
ABLE
B-2 FE POE LED
Status
Description
Off
The port is disabled or the attached device has not
requested power. POE is not being provided by the port.
Green
POE is being provided to the attached device.
Amber
The attached device has requested power, but POE is not
being provided by the port.
1
A
B