Alcatel Carrier Internetworking Solutions Alcatel OmniAccess 4324 - Manual (Page 16)

OmniAccess 4324: Installation Guide
2 Part 031640-00 May 2005
z
The switch firmware can be easily upgraded as future software releases are
made available. You can install upgrades using TFTP.
Physical Description
F IGURE 1-1 OmniAccess 4324 Wireless LAN Switch Sys-
tem
System Indicator LEDs
24 FE ports
These network ports are used for connecting wireless APs, such as the Alcatel
Wireless Access Point, as well as wired LAN segments. The ports provide
10/100 Mbps Fast Ethernet connectivity, and in some cases, power and serial
connectivity as well. See
“FE Network Ports” on page 18 for port, LED, and
cable specifications.
4 1
6 6
5
2 3
7
Front View
Rear View
T ABLE 1-1 System LEDs
LED State Description
Power Green Switch is receiving proper power.
Off Switch is powered off.
Status Green Switch has booted and is functioning
properly.
Off Switch is booting, loading software, or
has failed.
1
2