Accessing control surfaces, Administrator, To s – Biamp LTR User Manual
Page 83
Sending Control Surfaces
Accessing Control Surfaces
Once the computer is
for communication, use the
or
to Connect
To Network. This produces a System Connect screen, allowing the appropriate system to be
selected from the System List.
Open Control Surfaces retrieves any daVinci file that has already been sent to the system. This
will require a User Name and Password, as established under
.
Send Control Surfaces stores the currently open/active daVinci file into the system. Update
User Accounts allows changes to the daVinci file
to be sent to the system. Clear
Control Surfaces allows any existing daVinci file to be removed from the system. NOTE: Send
Control Surfaces, Update User Accounts, and Clear Control Surfaces require an 'Administrator'
password. The Administrator password can be either the 'Designer' level or 'Technician' level
password from the Audia or Nexia system design itself (not the daVinci file). The 'Administrator'
must also be connected at the 'High Privilege Session' position (first connected user) as indicated
in the
81