Biamp LTR - Manual (Page 28)

daVinci Printed Doc
Network Options
Network Device
Discovery Method
allows the user to
choose a method to
Connect To Network .
UDP Broadcast is the
default 'message'
based routine, which
looks for devices on a
common network. TCP
User Supplied Device
List allows connection
to a specified list of
device IP addresses.
This approach is
'communication' based,
and allows the user to:
avoid firewall conflicts;
create custom device
lists; access multiple
sub-networks; connect
remotely via modem.
Edit Device List allows
creation of the TCP
User Supplied Device
List. Use Add to create
a new entry, double-
click under Subnet
Address, and enter only
the first three sets of
numbers. Then click
Edit Nodes and select
the appropriate final set
of numbers for the
intended device(s).
Default Network
Timeout is a user-
definable period of time
after which software will
timeout if it does not
get a response from
firmware.
26