I-View FSKY-100 3D/4D Joystick Keyboard - Manual (Page 7)

7
Function Description
MON=001 CAM=001
INPUT
： 000
PROTOCOL
： PELCO-P
BAUD
： 9600
INPUT
： 000
Keypad and LCD panel Function Description
A D
B
C
1. LCD DISPLAY
This display will show the current ID number, protocol, baud rate and status.
2. 0~9 Number
Used for setting the camera ID, Preset number and modify the keyboard parameters.
Front Panel Back Panel
When you turn on the power the LCD
will show the information as below
Please refer to the function
description:
CAM: Display for camera ID address
INPUT: Display the status of current
operation
PROTOCOL: Show the current
control Speed dome protocol.
BAUD: Display the control baud rate.
A: Power input: Connect with DC9V
power supply.
B: RX OUT: Link to Phone Box for
Speed dome connection
C: RX IN: Reserve
D: MATRIX: Reserve