I-View FSKY-100 3D/4D Joystick Keyboard - Manual (Page 11)

11
Function Description
1-4. Setup the Keyboard parameters
Please follow the steps below to setup keyboard parameters.
Step 1. Press the [SHIFT] + [MENU] key and below picture will be shown.
Step 2. Enter the 4 numbers password and below picture will be shown. The default is 0000.
Step 3: Move joystick up or down to select parameter, which you want to modify. The selected
item will show a “> “ mark.
Step 4: Click “ ENTER “ key to modify the parameter. Move the up or down of joystick to choice
the parameter.
Step 5: Click “ ENTER “ to confirm the setting. The cursor will move to move the main menu for
another setting.
Step6: Click “ PGM “ key to save and exit the parameters setting.
PASSWORD
：
SET UP1
>MODE: 3D
PROTOCOL
： PELCO-P
BAUD RATE
： 9600