Dual Electronics XDVDN8290N - Manual (Page 25)

XDVDN8290N OPERATION
24
GENERAL Setup - Setting the Anti-theft code
Default Anti-theft password is 0000
and is turned off. To turn this
feature on, follow the steps below.
CAUTION!!
This will lock your unit from operating
if battery power is disconnected for
more than 5 minutes.
Step 1 & 2
Step 3 & 4
Step 5 & 6
Step 7 & 8
Step 9 & 10
1) Touch top left corner of screen. 2) Touch GENERAL icon.
3) Touch down arrow icon. 4) Touch ----.
5) Enter 0000, then press OK. 6) Touch Off.
7) Touch On. 8) Touch ---- again.
9) Enter your new 4-digit password,
then press OK.
10) Touch RETURN to exit.
L
L
1
2
L
3
L
4
Note: it is
recommended that
you choose your own
4-digit password
carefully, write it down
somewhere and keep
in a safe location. In
the event you ever
lose or forget your
password, call our tech
hot line for support
on how to unlock your
system.
L
L
5
6
L
7
L
8
L
9
L
10