Acura 2011 ZDX Navigation - Manual (Page 120)

Navigation System 119
System Setup
Switching Display Mode Automatically
I
Recommended Display Mode Day/Night Settings:
• With the headlights on, select mid-range for the dash illumination (see your Owner’s Manual for location of buttons).
• With the headlights off, select mid-range for the dash illumination (see your Owner’s Manual for location of buttons).
• On the SETUP Color adjustment screen, choose white for the map
Day display and black for the map Night display (see
page 117). Inappropriate adjustment of these colors can cause the Day / Night modes to appear inoperative.
llumination control Priority Operation But remember
Display Mode button
(see page 11)
1 Allows selection of Day , Night , or Off display
mode. This button has the highest priority and
overrides all other display control adjustments
listed below.
Once you press this button, you assume full
manual control of the display mode until the
ignition key is cycled again.
Sunlight sensor (middle of
dash near the windshield, see
your Owner’s Manual for
location)
2 If the sunlight sensor detects daylight and the
headlights are turned on, the system
automatically overrides (cancels) the Night
display and displays the Day display mode.
If desired, use the Display Mode button
to override this automatic choice.
Dash illumination adjustment
buttons (see the vehicle
Owner’s manual for location)
3 When headlights are turned on, and you wish to
have the Day display mode, then adjust the
illumination to the full bright setting (beeps).
Adjust the dash brightness back to mid-range
to allow auto switching by sensing the
headlights are on or off.
Headlights (Auto/On/Off) 4 When turned on, the display changes to Night
display mode. The previous three controls
listed above can “cancel” this function.
Use the Display Mode button , or
adjust the dash illumination to full bright to set
the display to your desired choice.
Map Day / Night screen color
choice (see page 118 for the
Day and Night color choices)
N/A The user can select the color of the screen that
will be displayed for the Day and Night
display modes described above.
For best contrast, ensure that the map color is
white for Day and black for Night .