Acura Embedded AcuBrite 19″-Nav - Manual (Page 39)

AcuBrite 19-Nav Manual
Troubleshooting
All products are, prior to packing and shipping, subjected to comprehensive test and quality assurance
programs. However, if this unit should develop a fault, please refer to the following table to identify the most
likely cause and the corrective action required to restore normal operation. If you still have a problem after
referring to the table below, contact your local dealer, national distributor or Acura Embedded System Inc
Technical Services Department for further advice.
Common problems and their solutions
Problem Solution
The display is very dim or dark Adjust the display as described in “Image adjustment
on ” Section 5 OSD Menu.
The display shows the message ‘No Input’ Check that the video source
i.e. display, camera, DVD etc. is powered and that
the cables are correctly connected.
You have pressed the power button, but the
display does not function.
1. Make sure that the power cable is well connected
and that all connections are tight and free from
corrosion.
2. Check the system fuse.
Page 38