Acura Embedded AcuBrite 19″-Nav - Manual (Page 15)

AcuBrite 19-Nav Manual
<4pts Cal>
Correct 4 point locations on screen with the panel. Press [4 pts Cal], screen displays as follows.
Touch the blinking symbol on panel until beep or stop blinking .
Test the drawing position related to the display screen on panel. Click on the [Draw Test] button. There will be
a squared blue display showing.
In drawing test window, users can click [Clear] button to clear the window. Also, users can click [Quit] or press
mouse right button to quit from the drawing test.In drawing test window, users can verify the panel linearity,
calibration capability, and drawing line quality.
Touchkit provide more accuracy 25 points calibration for touch sensor. In addition, Touchkit provides
controller setting for capacitive touch sensor. If the capacitive controller is selected, a capacitive setting property
page appears on the advanced sheet. In general case, it does not need to do 25 points calibration other then
bad linearity sensor.
Press [Clear] to clear the previous calibration records.
Press [Yes] to clear previous records. The record will become default record.
Page 14