FIAT Panda User Manual

Page 73

Text mode
Original mode

CLOSING
Proceed as follows:

❒ keep the bonnet raised with one hand and remove

rod C fig. 63 from housing E with the other,
inverting the opening motion, then fit it back into
its catch D;

❒ lower the bonnet to approximately 20 centimetres

from the engine compartment and let it drop.
Make sure that the bonnet is completely closed
and not only fastened by the safety catch by trying
to open it. If it is not perfectly closed, do not try
to press the bonnet lid down but open it and
repeat the procedure.

IMPORTANT Always check that the bonnet is closed
correctly to avoid it opening while the car is
travelling.

WARNING

Perform these operations only when the
car is stationary.

The following plate fig. 64 is applied inside the engine
compartment:

fig. 63

F0W0095

fig. 64

F0W1004

GETTING TO

KNOW YOUR CAR

SAFETY

STARTING AND

DRIVING

WARNING LIGHTS

AND MESSAGES

IN AN EMERGENCY

SERVICING AND

MAINTENANCE

TECHNICAL

SPECIFICATIONS

INDEX