beautypg.com

FIAT Panda User Manual

Page 256

background image

SYSTEM RESET function

This function is used to restore all settings to the
factory values.
The options are:
❒ NO: no restore intervention;
❒ YES: the default parameters will be restored.

During this operation, the text “Resetting” appears
on the display. At the end of the operation, the
source does not change and the previous situation
will be displayed.

PHONE SET-UP

If a hands-free kit is installed on the car, when there
is an incoming phone call the radio audio will be
connected to the telephone output. The incoming
telephone sound always arrives at a fixed volume, but
it can be adjusted during the conversation using the

ON/OFF button/knob.

The fixed telephone audio volume can be adjusted
using the "SPEECH VOLUME" function in the Menu.
The text “PHONE” appears on the display during the
telephone audio deactivation.

ANTI-THEFT PROTECTION

The radio is equipped with an anti-theft protection
system based on the exchange of information
between the radio and the electronic control unit
(Body Computer) on the car.

This system guarantees maximum safety and prevents
the secret code from being entered each time the
radio power supply is disconnected.

If the check has a positive outcome, the radio will
start to function, whereas if the comparison codes
are not the same or if the electronic control unit
(Body Computer) is replaced, the device will ask the
user to enter the secret code according to the
procedure described in the paragraph below.

Entering the secret code

When the radio is switched on, if the code is
requested, the display will show "Radio code" for
about 2 seconds followed by four dashes "- - - -".
The code is made up of four numbers from 1 to 6,
each corresponding to one of the dashes.
To enter the first digit of the code, press the
corresponding button of the pre-selected stations
(from 1 to 6). Enter the other code digits in the same
way.
If the four digits are not entered within 20 seconds,
the display will show "Enter code - - - -". If this
occurs, it is not considered an incorrect code entry.
After entering the fourth digit (within 20 seconds),
the car radio will start to work.

252

SOUND-S

YSTEM