FIAT Panda - Manual (Page 262)

LOADING/EJECTING A CD
To load the CD, insert it gently into the slot to
activate the motorised loading system, which will
position it correctly.
The CD can be loaded with radio off and the ignition
key turned to MAR: in this case the radio will remain
off. When the radio is turned on, the last source
listened to before being switched off will be
activated.
When a CD is inserted the display will show the
symbol "CD-IN" and the text "CD Reading". They
will remain displayed for the entire time required for
the radio to read the CD tracks. When this time has
elapsed the radio automatically starts playing the first
track.
Press the
button (EJECT) with the radio on to
activate the motorised ejection of the CD. After
ejection, the last audio source listened to before
playing the CD will be heard.
WARNING
Do not inadvertently press the eject
button when inserting a CD.
If the CD is not removed from the radio, it will
automatically be reloaded about 20 seconds later and
the Tuner mode will be activated (Radio).
The CD cannot be ejected if the car radio is off.
If the ejected CD is reloaded without having removed
it completely from the slot, the radio will not switch
to the CD source.
Possible error messages
If the CD loaded cannot be read (e.g. a CD ROM has
been inserted or the CD is inserted the wrong way
round or there is a reading error) the display will
show the words "CD error".
The CD will then be ejected and the audio source
activated prior to the CD mode selection will be
heard.
With an external audio source activated ("TA",
"ALARM" and "Phone"), the CD that cannot be read
will not be ejected until these functions have ended.
At the end, with the CD mode activated, the display
will show the text "CD error" for a few seconds and
then the CD will be ejected.
If the CD player overheats CD playback could be
temporarily interrupted. The radio will automatically
switch to the Radio (Tuner) mode and the display will
show “CD hot” and then “CD error”.
258
SOUND-S
YSTEM