FIAT Panda - Manual (Page 165)

FOG LIGHT/REAR FOG LIGHT
To change the bulb, proceed as follows:
❒ adjust the tabs A and remove the flap B fig. 133;
❒ adjust the catch C and disconnect the electrical
connector D fig. 134;
❒ turn and remove the bulb holder E;
❒ extract the bulb and replace it;
❒ refit the new lamp and carry out the procedure
described previously in reverse.
WARNING
Before replacing the bulb, wait for the
catalytic converter to cool down: RISK
OF BURNS
NUMBER PLATE LIGHTS
To replace the bulbs proceed as follows:
❒ remove lens A fig. 135;
❒ replace the bulb A fig. 136, releasing it from the
side contacts;
fig. 133 F0W0205
fig. 134 F0W0206
fig. 135 F0W0259
161
GETTINGTO KNOW
YOURCAR
SAFETY
STARTING AND
DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN
EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX