8e6 Technologies ProxyBlocker MSA-004-005 - Manual (Page 12)

8 8
e
6 P
roxy
B
locker
Q
uick
S
tart
G
uide
3. Locate the three holes on each side of the chassis and locate the three correspond-
ing holes on each of the inner rail.
4. Attach an inner rail to each side of the chassis and secure the inner rail to the chas-
sis by inserting three Type G screws through the holes on each side of the chassis
and the inner rail. (See the diagram below for a description of the Type G screw.)
5. Repeat the above steps to install the other rail on the chassis.