Xerox Nuvera 120 EA - Manual (Page 36)

Xerox Nuvera
®
100/120/144 EA Digital Production System - Customer Expectations Document
- 36 -
Inserter Module (IM)
One inserter may be installed on the output side of the printer. Either the 4-tray SFM or the 2-tray Large
Format SFM can be used as an inserter. The specifications for the Insertion Module are the same as for the
SFMs, except as noted in the table below, for the configuration when an insertion module is used with the
Multifunction Finisher:
Item Insertion Module used with the
Multifunction Finisher
Comments
Input Sizes • Trays 1 & 2 (SFM):
7” x 10” to 9” x 12.6”
(178mm x 254mm to 228.6mm x 320mm)
• Trays 1 & 2 (LFSFM):
7.17” x 10” to 12.6” x 18.5”
(182.1mm x 254mm to 320mm x 469.9mm)
• Trays 3 & 4 (available on SFM only):
7.17” x 10.0” to 12.6” x 18.5”
(182.1mm x 254mm to 320mm x 469.9mm)
− A5 and Statement cannot be fed from
any of the trays in the Insertion Module.
− Tabs cannot be fed from the Insertion
Module to the MFF Finisher (tabs
orientation incompatibility between the IM
and the MFF).
COMMENTS
• LCDS and IPDS applications are currently not able to pull paper stocks from the Insertion Module.