Yamaha CDR-S1000 - Manual (Page 28)

E-25
PLAYBACK FUNCTIONS
You can enjoy listening to your favorite tracks in any
desired order by programming tracks.
Program play
Display information during
programming
1 Shows the step number for the track to be
programmed next.
2 Shows the programmed track number.
3 Shows the total time of the tracks currently
programmed. If the total time exceeds 100 minutes,
only the last two digits of the total minutes will be
displayed.
Notes
• You can program as many as 40 tracks at one time.
• If DISPLAY is pressed during programming, the program
number display can be changed to display the total time of the
programmed tracks. To return to the previous display, press
DISPLAY again.
• During program play, pressing a numeric button on the remote
stops program play and skips to the beginning of the track of
the number pressed. Once that track has finished playing, the
previously interrupted program resumes play.
• To skip tracks within the program, press $ / ! or ⁄ / ›
( SKIP $ or SKIP › on the remote) during program play.
• To search all tracks including unprogrammed tracks, press and
hold $ / ! or ⁄ / › ( SEARCH ! or SEARCH ⁄
on the remote) during program play.
NATURAL SOUND CD RECORDER CDR-S1000
POWER FINALIZE ERASE DISPLAY
TRACK NO. EFFECT REC MODE
OPEN/CLOSE
CD DIRECT REC
INPUT
PHONES
REC LEVEL
LEVEL
DIGITAL/ANALOG
MIN MAX
0 10
OPTICAL COAXIAL ANALOG
REC MUTE
/ / /
EFFECT
FINALIZE
STOP PAUSE PLAY
SEARCH SKIP
ERASE REC REC MUTE
1 2 3
4 5 6
7 8 9
+10
0
INDEX
REPEAT RANDOM CLEAR PROG
REC MODE
TRACK NO.
WRITE DIMMER DISPLAY
OPEN/
CLOSE
DISPLAY ^
DISPLAY
PROG
Numeric
buttons
&
$ SKIP ›
STOP &
$ / ! ⁄ / ›
CLEAR
CD-RW
CD TOTAL
REMAIN
PROG
RNDM
REPEAT SINGLE
EFFECT REC ALL
AUTO
SYNC TOC R
dB
L
S F
32 44 48 .1
– 60 30 10 6 4 2 1 0 OVER 00 – – – – – – –
1
2
CD-RW
CD TOTAL
REMAIN
PROG
RNDM
REPEAT SINGLE
EFFECT REC ALL
AUTO
SYNC TOC R
dB
L
S F
32 44 48 .1
– 60 30 10 6 4 2 1 0 OVER 00 – – – – – – –
CD-RW
CD TOTAL
REMAIN
PROG
RNDM
REPEAT SINGLE
EFFECT REC ALL
AUTO
SYNC TOC R
dB
L
S F
32 44 48 .1
– 60 30 10 6 4 2 1 0 OVER 00 – – – – – – –
3
PLAY #
1
Press PROG on the remote to begin programming.
• The PROG indicator lights in the display.
• If “P-01” does not appear in the display after
PROG on the remote is pressed, press DISPLAY
repeatedly until it appears in the display.
2
Program the tracks in the order you want by pressing
the corresponding numeric buttons on the remote.
3
When the programming is completed, press ^
( PLAY # on the remote) to start programmed play.