Xtant M Series - Manual (Page 5)

SAFEGUARDS
Please take the time to read this Owners Manual. The
following guidelines are designed to assure a safe and
properly installed Xtant Mobile Audio System.
All Xtant amplifiers and accessories are intended to be installed by a certi-
fied mobile audio installation specialist. It is the recommendation of Xtant
Technologies that your new Xtant amplifier(s) and accessory module(s) as
well as all of your mobile audio equipment be installed by your Authorized
Xtant Dealer.
Caution!
The use of a high-powered, mobile audio sound system may cause dam-
age or hearing loss. Listening at loud volume levels may impair your
ability to hear traffic sounds, and therefore, may constitute a traffic
hazard. Xtant advises lower volume levels while driving.
Keep Your Sales Receipt
Your Xtant amplifier has an industry leading four year warranty when
installed by an Authorized Xtant Dealer. Non Authorized Xtant Dealer
installed products carry a limited one-year warranty. To establish the
starting date of warranty coverage, a copy of your sales receipt must
accompany your amplifier for all warranty service. Please file your sales
receipt away for future reference. For your convenience, a complete lim-
ited warranty statement is located at the back of this manual.
Follow Instructions
Follow all use and installation instructions to assure proper operation of
your new Xtant M Series amplifier.
Wiring Requirements
All Xtant amplifiers have minimum wire gauge requirements for Power,
Ground, Remote Turn-On, and Speaker Cables. Please refer to this man-
ual for the recommended wire gauges for each application.
Fusing Requirements
M Series amplifiers are not fuse protected! For safety, a fuse must be installed
in-line with the power wire within 12 inches of the battery. In the case of a multi-
amp system, use a fuse value equal to the combined total demand of all ampli-
fiers in the system. A second outboard fuse may be added close to the amplifier
if desired. Refer to the fuse values listed on page 9 for the correct in-line fuse
value for your amplifier.
Water and Moisture
Install all Xtant amplifiers and accessories in a location free
of moisture or exposure to water.
4