Yamaha PSR-270 - Manual (Page 99)

99
MIDI FUNCTIONS
Saving Bulk Data
1
First, set up the connected MIDI device for re-
cording the data.
The actual procedure may differ depending on your particular equip-
ment and software. For example, if you are using the Yamaha MDF3
MIDI Data Filer:
1) Make the appropriate MIDI connections.
2) Set up the MDF3 for recording MIDI data. (Refer to the
MDF3 Owner’s Manual.)
2
On the PortaTone, select the Bulk Dump Send
function.
Do this in the normal way:
1) Press the FUNCTION button.
2) Select parameter #86 (with the numeric keypad).
3
At the “BulkSnd?” prompt above, set the opera-
tion to standby.
Press the + button to start the Bulk Dump Send operation.
USING BULK DUMP SEND TO SAVE DATA
F86 BulkSend
STYLE
FUNCTION
YES BulkSnd?
STYLE
FUNCTION
This function cannot be
used in the Song mode or
when the accompaniment is
playing.
MDF3
MIDI IN MIDI OUT PSR-270
97