Yamaha PSR-270 - Manual (Page 30)

30
PLAYING VOICES — THE VOICE MODE
1
Select the Function mode.
Press the FUNCTION button.
2
Select the desired Function parameter number.
While the “FUNCTION” indication is flashing, use the numeric key-
pad to select the desired Main Voice Function parameter number (1 -
6). (See the “Parameters” list below for details.)
Function parameter numbers can be selected in the same way as with
the voices (see page 28). You can use the numeric keypad to directly
enter the number, use the +/- keys to step up and down through the
parameters, or press the FUNCTION button to advance through the
parameter numbers.
Since the “FUNCTION”
indication flashes for only a
couple of seconds, make
sure to select the parameter
quickly after step 1 above.
Flashes to indicate Function
parameter can be selected.
F01
001 116 MEASURE TEMPO
M.Volume
STYLE
FUNCTION
Function Parameters — Main Voice
The Function parameters provide additional settings for the Main
voice. These settings are especially useful when using a second voice
in the Dual or Split modes, since they let you change or enhance the
sound of the Main voice separate from the Dual or Split voice. These
settings include:
• Volume
• Octave
• Pan • Reverb Send Level
• Chorus Send Level
• DSP Effect Send Level
101 Std.Kit1 VOICE
STYLE
Drum Kit Voice Chart (voices 101 - 110)
When one of the 10 panel Drum Kit voices are selected you can
play different drums and percussion instruments on the keyboard.
The drums and percussion instruments played by the various keys
are marked by symbols above the keys.
No. Name LCD
101 Standard Kit 1 Std.Kit1
102 Standard Kit 2 Std.Kit2
103 Room Kit Room Kit
104 Rock Kit Rock Kit
105 Electronic Kit Elct.Kit
106 Analog Kit AnlogKit
107 Dance Kit DanceKit
108 Jazz Kit Jazz Kit
109 Brush Kit BrushKit
110 Symphony Kit SymphKit
28