Yamaha EMX100CD - Manual (Page 33)

E-25
English
Adjusting the graphic equalizer
for your desired sound taste
The 5 band graphic equalizer allows you to adjust the level
for each frequency band.
* Make adjustment by monitoring the equalizer level
indicators on the display.
1
Play back a source. (For source playback, refer to the
sections beginning on page 13.)
2
Press the equalizer control or button once or
more to select the frequency band to which you will adjust
the level.
* The selected frequency band is shown on the display.
* The scale bar of the selected frequency band on the
graphic equalizer level indicators will flash.
3
Press the equalizer control or button once or more
to adjust the level.
4
In the same way, make adjustment for other frequency
band.
Note
If the KARAOKE (including L R, L ONRY and R ONLY)
program is selected, cancel it or select another sound
field program.
Turning the equalizer to “flat” (the
state with no equalization applied)
By one of the following methods, the settings of preset
graphic equalizer mode (MUSIC) and sound field program
(PROGRAM) are turned off and the equalizer pattern is
turned to “flat”.
• Press the FLAT button on the remote control transmitter.
* Pressing the FLAT button once more will restore the
state before the equalizer was turned to “flat”.
• Press the MUSIC button and the PROGRAM button on the
front panel at the same time.
* There is no way to restore the state before the equalizer
was turned to “flat”.
USING GRAPHIC EQUALIZER
100 350 1K 3.5K 10K
CD CHANGER RECEIVER EMX–100CD
PHONES
POWER
DISC 1 2 3
PROGRAM
ECHO ECHO
MUSIC
USER MEMORY
INPUT SELECTOR
VCR/LD-TV/CD/TUNER/TAPE•MD/AUX
VOLUME
RANDOM
DISPLAY MIC
MIN MAX
MIC MIXING
REPEAT TIME MEMORY AUTO/MAN'L
HOUR
PRESET/TUNING/BAND A/B/C/D/E
MIN TIME ADJ TIMER
OPEN/
CLOSE
DISC
CHANGE
1
1
2
2
3
3
4
4
5
5
TIME
A
DISC SKIP
PROG
B C D
+ I0
E
OPEN/CLOSE RANDOM REPEAT MODE
6
6
7
7
8
8
9 0
CD
PRESET
TUNER
STOP
INPUT
PLAY/PAUSE
LEVEL MUSIC
TEST FLAT CENTER/REAR
/DELAY
ECHO PROGRAM USER
POWER
DISPLAY SLEEP
VOLUME
FLAT
2
3